Banner DF-G1 Install Sheet

Also see for DF-G1 Expert: Quick start guide Quick start guide Manual Installation guide

Banner DF-G1 Install Sheet Manual pdf 1 page image

For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.comAdvanced sensor with dual digital displays for use with plastic and glass fiber optic assembliesFor the latest technical information about this product, including specifications, dimensions, and wiring, see www.BannerEngineering.comOverviewFigure 1. DF-G1 Model Features1 Output LED2 LO/DO Switch3 RUN/PRG/ADJ Mode Switch4 Lever Action Fiber Clamp5 Red Signal Level6 Green Threshold7 +/SET/- Rocker ButtonModelsModel Outputs Connector*DF-G1-NS-2M Single NPN2 m (6.5') cable, 4-wireDF-G1-PS-2M Single PNPDF-G1-NS-Q3 Single NPN 150 mm (6") PVC pigtail, M8 Pico QDconnector, 4-pinDF-G1-PS-Q3 Single PNPDF-G1-NS-Q7 Single NPNIntegral M8 Pico QD connector, 4-pinDF-G1-PS-Q7 Single PNP* Cordset Options: A model with a QD connector requires amating cordset. For 9 m cable, change the suffix 2M to 9M inthe 2 m model number (example, DF-G1-NS-9M). For M12Euro QD pigtail change the suffix 2M to Q5 in the 2 m modelnumber (example, DF-G1-NS-Q5).WARNING: Not To Be Used for Personnel ProtectionNever use this product as a sensing device for personnel protection. Doing so could lead to serious injury or death. Thisproduct does NOT include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensorfailure or malfunction can cause either an energized or de-energized sensor output condition.HookupsNPN Models PNP Models Key23411 = Brown2 = White3 = Blue4 = BlackFor cable options, see http://www.bannerengineering.comDF-G1 - Expert Fiber Amplifier Install SheetP/N 161275 Rev. A 1/6/20120 161275 2