Banner DXM100-S Series Instruction Manual

Also see for DXM100-S Series: Instruction manual

Contents

Banner DXM100-S Series Instruction Manual Manual pdf 4 page image

1 DXM100-Sx Overview1.1 DXM100-Sx Modbus Slave System OverviewBanner's DXM Logic Controller integrates Banner's wireless radio and local I/O for a remote I/O device.ConnectivitySure Cross RadiosRS-485 MasterI/OUniversal InputsDiscrete OutputsCourtesy PowerSwitch PowerInputs/Outputs—On-board universal and programmable I/Oports connect to local sensors, indicators, and controlequipment.• Universal Inputs• Discrete outputs• Courtesy power• Switch power• Battery backup• Solar controllerConnectivity—The integrated Sure Cross® wireless radio enables Modbus connectivity to remote sensors, indicators, andcontrol equipment.Wired ConnectivityField Bus: Modbus RS-485 MasterWireless ConnectivitySure Cross MultiHop 900 MHz, or MultiHop 2.4 GHz1.2 DXM Configuration Tool OverviewThe DXM Configuration Tool configures the DXM Slave by creating anXML file that is transferred to the DXM Slave using a USB or Ethernetconnection. The DXM Slave can also receive the XML configuration filefrom a Web server using a cellular or Ethernet connection.This configuration file governs all aspects of the DXM Slave operation.The wireless network devices are a separate configurable system. Usethe DX80 User Configuration Tool (UCT) to configure the internal DX80wireless Gateway and the attached wireless Nodes. Use the MultiHopConfiguration Tool (MCT) if the internal radio is a MultiHop device.All tools can be connected to the DXM Slave using a USB cable or anEthernet connection.USBEthernetDXM Configuration SoftwareLocal RegistersRegisterView UtilitySchedulerAction RulesRegister MappingXML Config FileScript BasicSystemSettingsDXM100-Sx Wireless Modbus Slave4 www.bannerengineering.com - Tel: +1.763.544.3164