Banner Sure Cross DX80 Series Instruction Manual

Also see for Sure Cross DX80: Instruction manual Instruction manual Quick start guide Instruction manual Quick start guide

Contents

Banner Sure Cross DX80 Series Instruction Manual Manual pdf 17 page image

6. Examine reception readings (M, R, Y, G) of the Gateway at various locations.Site survey results display as a percentage. M represents the percent of missed packets while R, Y, and G representthe percent of received packets at a given signal strength.M = Percent of missed packets; R = RED marginal signal; Y = YELLOW good signal; G = GREEN excellent signal.Record the results if you need troubleshooting assistance from the factory.7. Change the Gateway's rotary dials to conduct a Site Survey with another Node and repeat steps 2 through 6.8. To end the Site Survey, double-click the Gateway's button 2.9. Change the Gateway's rotary dials back to 0.The LCD displays the device readings for the Gateway.10. Double-click button 2 to move back to the top level menu.11. Single-click button 1 to return to RUN mode.12. Install the rotary dial access cover, referring to the Installation section of the manual to create an IP67 seal.SITE (Site Survey) MenuThe SITE menu displays the results of a Site Survey conducted with this Gateway.NOD XXM XXR XXY XXG XX*SITESingle-clickButton 2Single-clickButton 2Double-clickButton 2adjust right rotaryswitch to survey theselected NodeDouble-clickButton 2AUTODISPLAYLOOPSite SurveyGateway The SITE menu displays the device number of the Node the Site Survey wasconducted with as well as the missed, green, yellow, and red received packetcount.The SITE menu is only available on the Gateways.To access the SITE menu, single-click button 1 to scroll across the menu levelsuntil reaching the Site Survey (SITE) menu.SeeConduct a Site Survey Using the Menu System on page 16.SeeInterpreting the Site Survey Results on page 19.3.6.2 Conduct a Site Survey from a Gateway Board ModelConducting a Site Survey, also known as an RSSI (Radio Signal Strength Indication), analyzes the radio communicationslink between the Gateway and any Node within the network by analyzing the radio signal strength of received data packetsand reporting the number of missed packets that required a retry.Perform a Site Survey before permanently installing the radio network to ensure reliable communication. Only the Gatewaycan initiate a Site Survey, and the Site Survey analyzes the radio communications link with one Node at a time. Follow thesesteps to conduct a Site Survey from the board module Gateway.Sure Cross® Performance DX80 Wireless I/O Networkswww.bannerengineering.com - Tel: + 1 888 373 6767 17