Banner SureCross DX80 Gateway Pro Reference Manual

Also see for SureCross DX80: Network manual Product manual Installation & operation manual Quick start guide Manual

Contents

Banner SureCross DX80 Gateway Pro Reference Manual Manual pdf 47 page image

P/N 134421 Banner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164SureCross™ DX80 Web ConfiguratorInstruction Manual System TabTrendingUse the Trending tab to set up statistical tracking of specific registers.To track a register:Enter the register number to be tracked in the Tracked Register # field.Select destination registers for the Average Register, Min Register, and Max Register,by entering unassigned register numbers in the supplied fields. Unassigned integer andfloating point registers are listed at the bottom of the screen. To automatically assign theresult registers, click the Auto Allocate button. The default starting registers are the firstregisters not allocated to I/O points.Select how often to reset the statistics from the drop-down list. The reset values can bewhen logged, daily, or hourly. Selecting when logged resets the calculations when thevalues are logged to a file.Enter the time period for the data sampling and the number of slices, or samples, withinthat time period.Click the Update button to submit the changes.When tracking any registers, the average, minimum and maximum registers must be assigned. Donot leave these values set to zero unless no registers are tracked.The trend data is updated at the period entered and this period is divided into the number of slices,or samples. A sliding window average of this number of slices is maintained and this filtered value isprocessed as the trend data. The minimum data value is the average lowest value for each periodsampled. The maximum data value is the average highest value over each period sampled.All result registers for a given tracked register are reset when any one of the result registers islogged if when logged is selected for reset. However, all resets are performed after the entire logrecord has been compiled for the given log cycle to avoid logging partial results.Other CommandsDelete button: Removes the trend number listed in the Showing box.Insert button: Inserts a new trend number in front of the trend number listed in the Showing box.Prev and Next buttons: Displays the next rule.Update button: Sends new data or settings to the Ethernet Bridge or Gateway Pro.1.2.3.4.5.