P/N 134421 9Banner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164SureCross™ DX80 Web ConfiguratorInstruction Manual Advanced TabOn DemandUse the On Demand tab to set up scheduled events that occur only once instead of daily.The starting time and date (ON Time/Date) determine when the ON Value is applied to the givenregister. The ending time and date (OFF Time/Date) determine when the ON period ends. The OFFValue is applied at the end of the ON Time.After an On Demand event has passed, it should be removed from the list. The expired eventremains included in the list until it is deleted, serving as a record of a past event.To reference the astronomical clock instead of fixed time of day, enter DAWN or DUSK in place ofthe HH:MM:SS on and off times. An offset in minutes may be included. To specify one half hourafter sunrise, enter dawn+30. To specify one half hour before sunset, enter dusk-30, etc. Upperand lower case is ignored, but do not include any spaces in the dawn/dusk string. The astronomicalclock will not work unless latitude, longitude, and time zone are set in the System > Setup > Timeand Date tab.Other CommandsDelete button: Removes the rule listed in the Showing box.Insert button: Inserts a new rule number in front of the rule listed in the Showing box. It is notnecessary to use the Insert button to add events to the bottom of the list or to define any eventswith zero for the time and date. To add a rule at the bottom of the list, increase the number ofcommands/rules enabled.Prev and Next buttons: Displays the next page of On Demand events.Update button: Sends new data or settings to the Ethernet Bridge or Gateway Pro.