On the Gateway use the DERR menu to clear, disable, or ignore error messages generated by devices within the net-work. The Node number that generated the error and the error code (EC) display onscreen. Single-click button 1 to ad-vance through the menu of CLEAR (clear this particular instance of the error from the system), DISABL (disable this partic-ular error from appearing from this specific Node), and IGNORE (ignore this error but do not remove it from the system).After the error messages for a Node are cleared, disabled, or ignored, errors for any additional Nodes display on the Gate-way’s LCD.On the Node use the DERR menu to view and ignore error messages for that Node.5.2 Web-based ConfigurationThe SureCross wireless systems are configured using an Ethernet network connection and a common Web page browser. An Ethernetconnection can be established from a GatewayPro or from a DX83 Ethernet Bridge serially connected to the Gateway.The Ethernet Bridge and GatewayPro each ship with an Ethernet crossover cable. One end of the cable is a RJ45 connectorand the other end is an industrial Ethernet connector. This cable is designed to be connected directly to a computer.5.2 Example Layout #1When connecting a Gateway to a host system, the wireless network must be configured using the User Configuration Tool(UCT). When you are not using a GatewayPro or Ethernet Bridge, you cannot configure the wireless network using the WebConfigurator.Host1231. Power connection2. Splitter cable and Modbus RTU communication3. Gateway5.2 Example Layout #2This system uses a GatewayPro connected directly to a host system using an Ethernet crossover cable. This system can beconfigured using the web pages.SureCross DX80 and Performance DX80 Product Manual38 www.bannerengineering.com - tel: 763-544-3164 Rev. J
