Banner WORLD-BEAM QS18 Expert Series Instruction Manual

Banner WORLD-BEAM QS18 Expert Series Instruction Manual Manual pdf 14 page image

4 Select TEACH/SET MethodSelf-Contained Models: To select Light SET, Dark SET, Window SET, Two-Point Static TEACH, or Dynamic TEACH, followthese steps.Opposed-Mode Models: When using the receiver to select Light SET, Dark SET, Window SET, Two-Point Static TEACH,Dynamic TEACH, or Opaque mode, follow these steps.1. Initiate select TEACH/SET Method.Method Action ResultPush Button Click the button five times The green LED turns off and the amber LEDflashes at 1 Hz.Remote Input Pulse the remote input line five times2. Select TEACH/SET Method.Method TEACH/SET Method Action ResultPush ButtonTwo-Point Static TEACH Click the button one timeThe selected TEACH/SETmethod is enabled.Dynamic TEACH Click the button two timesWindow SET Click the button three timesLight SET Click the button four timesDark SET Click the button five timesOpposed-Mode Models:Opaque Mode Click the button six timesIO-LinkTwo-Point Static TEACHSet BDC1 Mode using IO-LinkDynamic TEACHWindow SETLight SETDark SETOpposed-Mode Models:Opaque ModeRemote InputTwo-Point Static TEACH Pulse the remote line one timeDynamic TEACH Pulse the remote line two timesWindow SET Pulse the remote line three timesLight SET Pulse the remote line four timesDark SET Pulse the remote line five timesOpposed-Mode Models:Opaque Mode Pulse the remote line six timesWORLD-BEAM QS18 Expert with IO-Link14 www.bannerengineering.com - Tel: + 1 888 373 6767