87of the fork, pull the fork pin turn 1/4 circle, the fork clearance must be adjustedaccording to the loaded goods.8.4 Roller positionThere are three kinds of rollers, main roller, side roller group and side roller. Theyare separately mounted on the inner mast, outer mast and lift bracket. The main rollerssustain the main loads from front, which can’t be adjusted, and rear direction and theside rollers sustain the side loads with the left and right side clearance adjusted by thegasket group, this will make the inner mast and lift bracket move freely. See Fig8.3,Fig8.4.Fig8.3 Roller mounting (8t forklift)Fig8.4 Roller mounting (10t forklift)
