4. OperatingBarco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 06 – February-2005 ___________________________________________________________________ 4-194.6.4 Displaying video and RGB signalsControl Panel for Quad Analog Video CardFigure 4-4Xvideo control panelC Set contrast of video displayB Set brightness of video displayS Set saturation of video displayLive Start video displayStill Freeze video displayQAVC 1 Select video card (the cards can be renamed)Channel 1 Select video channel of the Q UAD A NALOG V IDEO C ARD (max. 4 channels; the channels can berenamed)Encoding Shows the detected video standard (PAL, NTSC, SECAM)Signal Select recording standard (VHS, S-VHS)Fps Select the frame rate (FULL, HALF - default)Table 4-5Configuration of the video displayIn the Control Panel you can adjust the video display regarding hue, saturation and brightness etc.The video client can store these settings as well as the selected video channel in a configuration file. From theFile menu you can choose to save the current configuration or read in other.A certain configuration file can also be invoked as an option on the command line when starting the video client.Please, refer to section 4.6.5 The options.
