Barco ClickShare CSE-800 Installation Manual
Also see for ClickShare CSE-800: Installation guidesUser guideUser guideInstallation manualHow-to
                                                                                                    | |
Contents
| 
6. CSE-800 Configurator6.8 Display setup, outputResolutionThe output resolution to the display can be set to Auto or a predefined pixel aspect ratio. When set to Auto, the output resolution isautomatically adapted to the resolution of the display.ClickShare PositionThe content of HDMI1 on display 2 and the content of HDMI2 on display 1 can be switched. This can be handy when the displaysare mounted in a different order.How to enable an output1. Log in to the Configurator.2. Click Display & Audio → Outputs.Image 6-15Display outputs3. Check the check box in front of Enable to enable the output.Checked: output enabled.Not checked: output blockedHow to set up1. Log in to the Configurator.2. Click Display & Audio → Outputs.3. Click on the drop down box next to Resolution and select the desired resolution.When Auto is selected, the output resolution is automatically adapted to the resolution of the display.4. To change the ClickShare position, click on the drop down box next to ClickShare Resolution.The position can be set to 1 or 2.Default value,for HDMI1, ClickShare position is set to 1, the content will be displayed on display 1for HDMi2, ClickShare position is set to 2, the content will be displayed on display 2By changing the ClickShare position it is possible to show the content of HDMI1 on display 2 and the content of HDMI2 on display1. This can be handy when the displays are mounted in a different order.5. Click on Save changes to apply the new settings.About Display modeExtended mode40 R5900049 CLICKSHARE CSE-800 19/03/2018 |
Related manuals for Barco ClickShare CSE-800
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine