Barco Coronis Fusion 10MP User Manual

Contents

Barco Coronis Fusion 10MP User Manual Manual pdf 24 page image

24 Coronis Fusion 10MPStand-by switchingSwitching on the display while it is in stand-by mode or vice versa canboth be done by using the keys or by using the control wheel.TO SWITCH YOUR DISPLAY ON/STAND -BY USING THE KEYS :1 Light up the keys indicator lights as previously described.2 While the keys are light up, touch the Stand-by/Cancel key forapproximately 2 seconds.TO SWITCH YOUR DISPLAY ON/STAND -BY USING THE CONTROL WHEEL:1 Press and hold the control wheel for approximately 2 seconds.As a result, the display will switch on or will switch to stand-by mode.When the display is switched on, the power status indicator light isdimmed. When the display is in stand-by mode, the power statusindicator light is orange.The power status indicator light can be enabled in the OSDmenu so that it will turn blue when the display is switchedon. Please refer to “Power status indicator light” on page 28for detailed instructions on how to do this.In case of a power outage recovery, your display will alwaysstart-up in the power mode it was in before the powerinterruption (i.e. stand-by or on). This protects your displayagainst inadvertent image retention problems.