Barco Coronis Fusion 10MP User Manual

Contents

Barco Coronis Fusion 10MP User Manual Manual pdf 40 page image

40 Coronis Fusion 10MPTO MANUALLY SELECT A VIDEO ENCODING MODE:1 Bring up the OSD main menu.2 Navigate to the Configuration > Image Sources > (Left/Right)Image Source menu.3 Enter the Video Encoding submenu.4 Select one of the available video encoding modes and confirm.Grayscale conversion modesA BOUT GRAYSCALE CONVERSION MODESGrayscale conversion modes specify how color generated on the displaycontroller is converted to grayscale in your display.The available grayscale conversion modes are:Dual 10 Dual 10 is a Barco specific 10-bit videoencoding mode which is usually used ongrayscale displays and which allows fullrefresh rate.Automatic When selecting this option, your CORONISFUSION 10MP display will automaticallyassign the correct video encoding settingsto the connected video input signals.Your CORONIS FUSION 10MP display automatically detects theconnected video input signals and applies the correct grayscaleconversion settings. Manually selecting a grayscale conversionmode is possible, but then your display’s image sourceselection mode should be set to allow this. Please refer to“Image source selection modes” on page 36 to do this.Use Red Channel This mode is intended for grayscaledisplays where gray is sent over the redchannel.