3. InstallationLens Length of projectorCLD (1.2-1.6:1) 530 mmCLD (1.6-2.4:1) 525 mmCLD (2.4-4.3:1) 550 mmQCLD (1.1-1.3:1) 580 mmQCLD (0.85:1) 610 mm3.1 Battery installation in the RCUHow to install the batteryTwo batteries are packed together with the RCU. Before using your RCU, install first these batteries.1. Remove the battery cover on the backside by pushing the handle a little towards the bottom of the RCU.2. Lift up the top side of the cover at the same time.3. Insert the batteries as indicated in the RCU.4. Put the battery cover on its place.How to replace the batteries in the RCUTo replace the batteries :1. Remove the battery cover on the backside by pushing the handle a little towards the bottom of the RCU.2. Lift up the top side of the cover at the same time.3. Push on the + side of the battery towards the - side4. Lift up the battery at the same time.5. Repeat for the second battery.6. Insert the batteries as indicated in the RCU (battery type AA or LR6 or equivalent).7. Put the battery cover on its place. (image 3-2)Image 3-28 R5976837 BARCO ID R600/R600+ 21/09/2006Downloaded From projector-manual.com Barco Manuals
