Barco ID R600 Owner's Manual

Also see for iD R600: Owner's manual

Contents

Barco ID R600 Owner's Manual Manual pdf 18 page image

3. Installation3.5 Connections3.5.1 Power connectionAC power (mains) cord connectionUse the supplied power cord to connect your projector to the wall outlet.Plug the female power connector into the male connector at the front of the projector.The power input is auto-ranging from 90 to 240 VAC.FusesFor continued protection against fire hazard :• refer replacement to qualified service personnel• ask to replace with the same type of fuse.3.5.2 Input Source connectionsOverview• Input section• Input facilities• 5-Cable input• Composite Video Input• S-Video input• Digital Visual Interface (DVI) input• Computer input• Serial Digital Interface (Optional)• Audio input/Output (Optional)• Communications Connections3.5.2.1 Input sectionInput LayersThe input section is divided in layers, each of them regrouping several inputs, this architecture allows the input section to be upgradedat any time with an optional analog or digital layer.1. Layer 1: analog layer containing analog data and video inputs2. Layer 2: a hybrid layer containing 2 digital and 1 analog input3. Layer 3 : is an optional layer, it may be an Audio & Video analog layer or a SDI digital layer3.5.2.2 Input facilitiesThe optional features are also explained in this manual, they are always mentioned with “(optional)”overview• 5–cable input• composite video• component video (PR/Y/PB)• S-Video• Digital Visual Input (DVI)• Computer• Serial Digital Input (Optional)• Audio input/output (Optional)14 R5976837 BARCO ID R600/R600+ 21/09/2006Downloaded From projector-manual.com Barco Manuals