Barco MDCG-3221 User Manual
Also see for Coronis 3MP LED MDCG-3221: User guideUser guide
                                                 | |
Contents
| 
3. Display installation5. Remove the four screws fixing the foot while supporting the foot.6. Attach the arm stand firmly to the panel using 4 screws M4 x 8 mm.3.7 First time starting upOverviewYou are now ready to start up your CORONIS 3MP LED Display for the first time.1. Switch on your CORONIS 3MP LED Display as described in "Standby switching", page 16.2. Turn on the computer connected to your display.If you have properly installed your display and display controller, the Windows start-up messages willappear once the boot procedure is finished.Your CORONIS 3MP LED Display will be running in a basic video mode at a default re-fresh rate when first time starting up. If you are using a Barco display controller, pleaseconsult the user guide delivered with it to install the drivers, software and documenta-tion. When this is done, your display will automatically detect the connected video inputsignal(s) and apply the correct video mode and refresh rate.14 K5902060 CORONIS 3MP LED DISPLAY 28/02/2014 |
Related manuals for Barco Coronis 3MP LED MDCG-3221
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine