Barco MDCG-3221 User Manual

Also see for Coronis 3MP LED MDCG-3221: User guide User guide

Barco MDCG-3221 User Manual Manual pdf 24 page image

5. Advanced operation5.9 HibernateAbout hibernateEnabling hibernation will not only switch off the backlight but will also force the display to disable otherfunctionalities so that power consumption is further reduced to a minimum. This happens after a specificperiod of time which can be manually adjusted.Hibernate can only be enabled on your display when the DPMS mode is enabled first.Therefore, please refer to "DPMS mode", page 21 to do this.To enable/disable hibernation on your display:1. Bring up the OSD main menu.2. Navigate to the Configuration > Power Management menu.3. Enter the Hibernate submenu.4. Select Enabled/Disabled as desired and confirm.To specify the hibernate timeout:1. Bring up the OSD main menu.2. Navigate to the Configuration > Power Management menu.3. Enter the Hibernate Timeout submenu.4. Set the timeout value as desired and confirm.5.10 Luminance targetAbout the luminance targetThe luminance target of your CORONIS 3MP LED Display is adjustable over a predefined range. Whenyou change the luminance target, the display will adjust its backlight to reach the target.To set the luminance target:1. Bring up the OSD main menu.2. Navigate to the Configuration > Calibration menu.3. Enter the Luminance Target submenu.4. Set a luminance target value as desired and confirm.The default value is 1000 cd/m². The five year warranty is valid for this setting.5.11 Viewing modesAbout viewing modesThe CORONIS 3MP LED Display can be used in two viewing modes:22 K5902060 CORONIS 3MP LED DISPLAY 28/02/2014