Barco MDSC-8231 User Manual
Also see for MDSC-8231: User guideUser guide
                                                   | |
Contents
| 
3. Display installation- 1 x DisplayPort 1.2 MST connected to the Main DisplayPort input or,- 2 x DisplayPort 1.1 connected to the Main and 2 nd DisplayPort input, where each input drives onehalf (right/left) of the screen or,- Nexxis link: 2 x 10Gb Ethernet connected to the Main and Secondary SFP+ 10Gb optical Ethernetinterface, where each input drives one half (right/left) of the screen.Warning:DisplayPort VESA DP 1.2 certified cables for 5.4 Gbps HBR2 are recommended.2. When the SDI video input is connected, an additional SDI video sink can be connected to the SDI output(= SDI input loop-through).3. Screen image clone: The entire active image on the screen (including OSD) can be duplicated to aFHD (1080p/1080i) signal on the DVI output connector, to which an additional DVI video sink can beconnected. For 4K images, the central part of the image (pillarbox to 16:9) will be down-scaled to FHDresolution.Note: The DVI output must be enabled in the OSD menu (please refer to "DVI output", page 35).4. Use any USB peripheral (keyboard, mouse, webcam, ...) by connecting it to the available USB inter-faces.5. Connect a headphone to the appropriate output to listen to audio sent over Nexxis.6. Connect a microphone to the appropriate input to send spoken audio over Nexxis.7. Connect a (set of) speaker(s) to the line out interface to listen to audio sent over Nexxis.8. Connect any kind audio player to the line in interface to send audio over Nexxis.9. Connect the display with Nexxis to use the remote control protocol or to update the display firmware.2 134MP3145678 9Image 3-33.3 Power supply connectionTo connect the power supply1. Connect the supplied external DC power supply unit to the +24 VDC power input of your display.2. Plug the other end of the external DC power supply into a grounded power outlet by means of theproper power cord delivered in the packaging.K5902130 (451920612471) MDSC-8231 04/11/2016 13 |
Related manuals for Barco MDSC-8231
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine