5. Advanced operation3. Enter the Color Temperature submenu.4. Select one of the available color temperature presets and confirm.Note: If you selected the User color temperature preset, a new menu will be displayed allowing you tomanually adjust the gain and offset of red, green and blue.5.1.6 Color spaceAbout color space presetsThe available color space presets for your display are:• ITU709• Native (wide color gamut close to DCI-P3)Factory calibration – Color space:When ITU 709 is selected, the White Color point and the RGB color primaries are ad-justed according to the target HDTV / sRGB color space defined in the ITU-709 recom-mendation. RGB primary calibration is performed within the physical limitation of theLCD panel used.To select a color space preset1. Bring up the OSD main menu.2. Navigate to the Picture menu.3. Enter the Color Space submenu.4. Select one of the available color space presets and confirm.5.1.7 GammaAbout gamma presetsThe available gamma presets for your display are:• 1.8• 2.2• 2.4• Video (transfer function adapted for video cameras with dark levels enhancement)• Native (no correction curve is applied)• DICOM (grayscale levels are following closely the DICOM curve – for reference only, not for diagnosticpurposes)To select a gamma preset1. Bring up the OSD main menu.2. Navigate to the Picture menu.3. Enter the Gamma submenu.4. Select one of the available gamma presets and confirm.5.1.8 SharpnessTo adjust the sharpness level1. Bring up the OSD main menu.2. Navigate to the Picture menu.K5902130 (451920612471) MDSC-8231 04/11/2016 25