Barco R9001870 Owner's Manual

Also see for Cine VERSUM 50: Installation manual Owner's manual

Barco R9001870 Owner's Manual Manual pdf 16 page image

3. OVERVIEW USER’s CONTROLSFactory address setting of the modulesThe factory address setting of the modules is as follows:Module Individual Address Common AddressCine VERSUM 80 address <9> no common addressCine VERSUM 50 address <9> no common addressCine VERSUM Master address <1> common address <0>Common address: is a fixed address, stored in the module. The module will execute the commands sent bya Remote Control, programmed with the common address <0>.3.5.2 Battery Insertion in the Remote ControlWhere to find the batteriesThe batteries are not placed in the remote control to avoid remote control operation in its package, resulting in a shorter battery lifetime.How to install the batteries1. Push the cover tab (A) with the fingernail a little backwards and pull upwards the cover top (B). (image 3-6)2. Slide the cover forwards to remove. (image 3-7)3. Push the battery body towards the spring and lift it up to remove. (image 3-8)4. Insert two AA size batteries, making sure the polarities match the + and – marks inside the battery compartment (image 3-8).5. Insert the lower tab of the battery cover in the gap at the bottom of the remote control, and press the cover until it clicks in place(image 3-8).Image 3-6Battery cover unlockImage 3-7Battery cover removalImage 3-8Battery removal12 R5976490 CINE VERSUM SYSTEM 17012003