Barco R9001870 Owner's Manual

Also see for Cine VERSUM 50: Installation manual Owner's manual

Barco R9001870 Owner's Manual Manual pdf 25 page image

5. Direct source selection5. DIRECT SOURCE SELECTION5.1 From standby modeUsing the digit buttons on the Remote Control1. Make sure that the connected sources to the Cine VERSUM Master are turned on.2. Using the digit button on the Remote Control, key in the corresponding slot number (from 1 to 8). (image 5-1)The Cine VERSUM Master powers up and starts on its turn powering up the connected displays. Image of the selected sourceappears on the display.Image 5-1Digit buttons on Remote ControlUsing the standby button on the Remote Control1. Make sure that the connected sources to the Cine VERSUM Master are turned on.2. Using the standby button on the Remote Control, press the standby button. (image 5-2)The Cine VERSUM Master powers up and starts on its turn powering up the connected display. The image of the last selectedsource will be redisplayed on the connected dipslay.Image 5-2Standby button on Remote ControlR5976490 CINE VERSUM SYSTEM 17012003 21