Barco R9002130 Owner's Manual

Also see for R9002130: Owner's manual Owner's manual

Barco R9002130 Owner's Manual Manual pdf 15 page image

Controlling4-15975039 BARCOVISION 508 1006984 CONTROLLINGBattery installation in the RCU.A new battery is delivered inside the plastic bag with the power cord. Before using the RCU, installfirst the battery.Remove the battery cover on the backside of the remote control by pushing the indicated handle alittle to the bottom of the RCU. Lift up the top side of the cover at the same time (fig. 1).Insert the new 9 V battery (E-block type, e.g. 6F22S or equivalent) in the lower compartment andconnect the battery to the contact plate.Insert the battery into the lower compartment and put the cover back.Caution : Do not display a stationary image with full brightnessand contrast for longer than 20 min., otherwise you risk damage tothe CRT's.fig.1310a.DRWfig.2BatteryContactplateInsert here,behind theplastic cover,the 'Insert cardfor RCU'. Youcan cut out thiscard on one ofthe last pages ofthis manual.Downloaded from ProjectorsManual.com Manuals