Barco R9002384 Owner's Manual

Contents

Downloaded from Projector.comGetting Started3-8 5976197 BARCOCINE 7 10012001When a picture control is selected, a text box with bar scale and the function name of the control (e.g. brightness) appear on the screen.The length of the bar scale indicates the current memorized setting for this source (percentage scale). The bar scale changes as thecontrol disc is pushed to the left or to the right.Brightness ControlA correct 'brightness' setting is important for good image reproduction. Adjust the brightness with the + button and - button (RCU)or pushing the control disc to the left or to the right (local keypad) until the darkest parts of the picture appear black.A bar scale gives a visual indication on the screen of the current brightness setting while pressing on the above indicated buttons.If the bar scale is not visible on the screen, press 'TEXT' once and retry the above indicated buttons.The bar scale increases when pressing on the + button (higher brightness) and decreases when pressing on the - button (lowerbrightness).Contrast ControlA correct 'contrast' setting is important for good image reproduction.Adjust the contrast to the level you prefer, according to room lighting conditions.A bar scale gives a visual indication on the screen of the current contrast setting while pressing the + or - buttons (RCU) or pushingthe control disc to the left or to the right (local keypad). If the bar scale is not visible on the screen, press 'TEXT' key once and retrythe above indicated buttons.The bar scale increases when pressing on the + button (higher contrast) and decreases when pressing on the - button (lower contrast).Color Saturation ControlColor saturation is only active for Video and S-Video. Adjust the color saturation using the + and - buttons (RCU) or pushing the controldisc to the left or to the right (local keypad). A bar scale gives a visual indication on the screen of the current color setting while pressingon the above indicated buttons. If the bar scale is not visible on the screen, press 'TEXT' key once and retry the above indicated buttons.The bar scale increases when pressing on the + button (richer colors) and decreases when pressing the - button (lighter colors).Tint ControlTint is only active for Video and S-Video. Tint control is effective only when using the NTSC 4.43 or NTSC 3.58 system. A bar scalegives a visual indication on the screen of the current tint setting while pressing the + or - buttons (RCU) or pushing the control discto the left or to the right (local keypad). If the bar scale is not visible on the screen, press the 'TEXT' key once and retry the aboveindicated buttons.The bar scale increases when pressing on the + button and decreases when pressing the - button.Sharpness Control.Sharpness control only active for Video and S-Video. A bar scale gives a visual indication on the screen of the current sharpness settingwhile pressing the + or - buttons (RCU) or pushing the control disc to the left or to the right (local keypad). If the bar scale is not visibleon the screen, press 'TEXT' key once and retry the above indicated buttons.The bar scale increases when pressing on the + button (sharper picture) and decreases when pressing on the - button (softer picture).The Pause key.When the Pause key is pressed, the image projection is stopped but the projector remains with full power for immediate restart.To restart the image :1 Press the Pause key,2 Select a source number.The Freeze key (only with line doubler).When the Freeze key is pressed, the image is frozen until this key is pressed again (only with built in Line Doubler)