7-6Random Access Adjustment Mode5976135 BARCOREALITY SIM6 21032000Select with or then to return.FILE SERVICELOADEDITRENAMECOPYDELETERENAME FILEFrome file name :Video525.s01To file name :demo.c10Select with or Reprogram with or or numeric keys to confirm to returnRENAME FILEFilename Src Resolution-----------------------------------------------------Video525.s01 1 675x240iVideo525.c01 1 675x240iVideo525.c02 1 675x240i-----------------------------------------------------Active file : Video525.c50Select with or to accept to return.CONFIRMEDIT FILESave changes to filexga.c30? to confirm to returnField Polarity :The field polarity function is used for interlaced images. Both rasters of the image could be shifted in a wrong way (double lines arevisible in the image). This can be corrected by forcing the field polarity to [neg] or [pos].Use the ENTER key to toggle between [pos] and [neg].Field Select : Default [both]The field select is only used for interlaced images. One frame of an interlaced image contains two fields, an even and an odd field.The choice exists to project [both] fields on the screen or only the [even] or [odd] field. This can be useful for 3D projection.Use the ENTER key to toggle between [both], [even] and [odd].Vertical Refresh [sync/async] : The way of updating the image information on the LCD panels.Not available for PAL-NTSC-SECAM sources. This option will be displayed in gray.1 For sources with a vertical frequency up to 60 Hz : the vertical refresh rate is the same as the vertical frequency of the incomingsource. This is a necessity to project moving images without 'motion artifacts'. For stationary images with a vertical frequencyup to 60 Hz it is still possible to use asynchronous refresh. When loading Pal, Secam, NTSC-files the synchronous mode is default,for all other sources below 60 Hz asynchronous mode is default.2 For sources with a vertical frequency higher that 60 Hz : the vertical refresh is different than the vertical frequency of the incomingsource. Synchronous refresh cannot be used.Vertical Sync Polarity : [leading] or [trailing]The vertical refresh can be synchronised with the leading sync edge or trailing sync edge. Default on [leading].Toggling to [trailing] is only necessary for special applications where the trailing edge of the sync signal has to be taken as a reference.Use the ENTER key to toggle between [leading] or [trailing]Press EXIT to leave the Edit File Option menu.A 'Confirm Edit File' menu will be displayed.Rename a file 2
To change the name of a selected file:1 Push the cursor key or to highlight 'Rename' (menu 1).2 Press ENTER.The Rename selection menu will be displayed (menu 2).3 Push the cursor key or to select a file name (menu 2).4 Press ENTER to select.The Rename menu will be displayed with the selected file name already filled in, leave in the 'From file name :' area and in the 'Tofile name :' area.The first character in the 'To file name :' area is highlighted (menu3).menu 1 menu 2 menu 3
