Barco RETRO GRAPHICS 2100LC R9001319 Owner's Manual

Contents

Barco RETRO GRAPHICS 2100LC R9001319 Owner's Manual Manual pdf 6 page image

1-1Safety Instructions5975958A RETRO GRAPHICS 2100LC 2101981WARNINGTO PREVENT FIRE OR ELECTRICAL SHOCKHAZARD, DO NOT EXPOSE THIS EQUIPMENT TORAIN OR MOISTURESAFETY INSTRUCTIONSNotice on SafetyThis equipment is built in accordance with the requirements of theinternational safety standards EN60950, UL 1950 and CSA C22.2No.950, which are the safety standards of information technologyequipment including electrical business equipment.These safety standards impose important requirements on the useof safety critical components, materials and isolation, in order toprotect the user or operator against risk of electric shock and energyhazard, and having access to live parts.Safety standards also impose limits to the internal and externaltemperature rises, radiation levels, mechanical stability and strength,enclosure construction and protection against the risk of fire.Simulated single fault condition testing ensures the safety of theequipment to the user even when the equipment's normal operationfails.INSTALLATION INSTRUCTIONSBefore operating this equipment please read this manualthoroughly, and retain it for future reference.Installation and preliminary adjustments should beperformed by qualified BARCO personnel or byauthorized BARCO service dealers.OWNERíS RECORDThe part number and serial number are located at the back side of theprojector. Record these numbers in the spaces provided below.Refer to them whenever you call upon your BARCO dealer regardingthis product.PART NUMBER :SER. NUMBER :DEALER :The lightning flash with an arrowhead within atriangle is intended to tell the user that partsinside this product may cause a risk of electricalshock to persons.The exclamation point within a triangle is in-tended to tell the user that important operatingand/or servicing instructions are included in thetechnical documentation for this equipment.FEDERAL COMMUNICATION COMMISSION (FCC STATEMENT)This equipment has been tested and found to comply with the limitsof a class A digital device, pursuant to Part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmfulinterference when the equipment is operated in a commercialenvironment. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance withthe instruction manual, may cause harmful interference to radiocommunications. Operation of this equipment in a residential area islikely to cause harmful interference in which case the user will berequired to correct the interference at his own expense.Note :The use of shielded cables is required to comply within the limits ofPart 15 of FCC rules and EN55022.* All the safety and operating instructions should be read before usingthis unit.* The safety and operating instructions manual should be retained forfuture reference.* All warnings on the equipment and in the documentation manualsshould be adhered to.* All instructions for operating and use of this equipment must befollowed precisely.On safety1. This product should be operated from an AC power source.This projector may be connected to an IT-power system.Operating AC power voltage of the projector:If you are not sure of the type of AC power available, consult yourdealer or local power company.2. This product is equipped with a 3-wire grounding plug, a plughaving a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insertthe plug into the outlet, contact your electrician to replace yourobsolete outlet. Do not defeat the purpose of the grounding-type plug.WARNING FOR THE CUSTOMERS: THIS APPARATUS MUST BEGROUNDED (EARTHED) via the supplied 3 conductor AC powercable.(If the supplied power cable is not the correct one, consult yourdealer.)BARCO RETRO GRAPHICS 2100LCArt.No. R9001319 (120V AC)