Barco UDX 4K32 User Manual
Also see for UDX 4K22: Installation manualUser manualUser manualInstallation manualUser manual
                                                                                  | |
Contents
| 
7. GUI – ImageHow to set the P7 desired values1. In the main menu, select Image → Advanced → P7 Realcolor.Image 7-7Advanced menu — P7 RealcolorThe P7 menu is displayed.Image 7-8P7 Realcolor menu2. Select the desired Mode. Choose one of the following:- Native: Default mode, with default values. All other options in the P7 menu are disabled.- Custom RGB: 3–point color configuration. In RGB mode, the C, M and Y coordinates will be calculated automatically basedon the R, G and B coordinates.- Custom RGBCMY: 6–point color configuration (both RGB and CMY). In RGBCMY mode, each color can be given a specificcoordinate within the measured color triangle.- Custom WHITE: Configure only the White temperature.3. Define the coordinates for each available color.Click on a coordinate value and select the current value. Enter the desired value with the numeric keys.Note: You can only pick coordinates within the measured color triangle.4. For Custom White, click on White point and choose one of the following:- Coordinates: Configure the white point via specific coordinates. The white point is specified using an x, y coordinate in theCIE 1931 Chart.- Temperature: Configure the white point via a color temperature slider. The white point is specified on a Kelvin scale between3200K and 13000K tracking along the black body curve.You can reset all coordinates to the default values (to native) by selecting Reset modes to native. Press OKbutton to reset.7.3 Setting the output resolutionThis menu is only available on the 4k models, with an actuator included.How to choose the output resolution1. In the main menu, select Image → Advanced → Output resolution.R5906112 UDX SERIES 24/05/2017 41 |
Related manuals for Barco UDX 4K22
manualsdatabase
Your AI-powered manual search engine