Barco UDX 4K32 User Manual
Also see for UDX 4K22: Installation manualUser manualUser manualInstallation manualUser manual
                                                                                  | |
Contents
| 
8. GUI – Installation8.4.1 Blend ZonesAbout offset and blending width or heightOffset is used to clip the image. The larger the offset value, the more the image is masked (by black bar) at the corresponding side.E.g. Top offset of 100 will blank the top 100 lines.Height or width is used to create a blending zone with a smooth brightness drop off. This is used to compensate for the doublebrightness in overlap areas. The value is the size of the blended area in pixels.How to adjust blend zones?1. In the main menu, select Installation → Blend → Blend Zones.Image 8-18Blend menu, ZonesThe Blend zones menu is displayedImage 8-19Blend Zone menu2. To enable blending, put the switch to the right. The color of the switch becomes blue when activated.3. To show blending lines on the screen, put the switch before Show lines to the right. The color of the switch becomes blue whenactivated.4. Specify the start position (offset)(1) for the blending height and width, setup an size value (2) to determine the width of the blendingarea.When the blending lines are activated, you will get a visual indication of the screen of the installed blending area.R5906112 UDX SERIES 24/05/2017 49 |
Related manuals for Barco UDX 4K22
manualsdatabase
Your AI-powered manual search engine