R5906151 /02 XDL748.1 Configuring the lens, zoom-focusWhat can be done?Once a lens has been installed in the projector, you can fine-tune the projected image.Zoom - Focus1. In the main menu, select Installation → Lens → Zoom focus.Image 8-1: Lens menu, Focus & Zoom2. Use the ▲ or ▼ key to zoom the lens in or out.Use the ◄ or ► key to focus the lens to far or near.Image 8-2: Zoom and focus adjustment8.2 Configuring the lens, shiftWhat can be done?The image can be shifted by using the vertical and horizontal lens shift.Lens shift is only possible when lens shift is calibrated. Please refer to the lens calibration section inSystem Settings → Lens Calibration menu.Vertical and Horizontal Shift1. To change the position of the projected image, select Installation → Lens → Shift.Image 8-3: Lens menu, Lens shiftGUI – Installation
