6. SetupHow to install the server software ?1. The server software is by default installed on the projector.if necessary, reinstall it from the CD.The CD containing the server software and the client tools are delivered with the projector. They can alwaysbe downloaded from the secured PartnerZone Web site : https://secure.barco.com/presentation/6.12 Configuring the client softwareThe same universal client interface is used for different network centric projectors (iQ, iD, iCon). The layout ofthe interface (position of the controls,...) is adapted after detection of the projector type. Some screenshotsmay not fully coincide with the reality.How to start up the client software ?1. Start up the previously installed client programThe interface shows 3 tabs (upper tab control ): Control, Diagnosis and ConfigurationThe active sub interface is the control sub screenImage 6-22Control interface2. Click on the upper menubar to select the desired sub interfaceIPInternet Protocol. The network layer of TCP/IP. Required for communication with the internet.How to add a projector to the projector list1. Click on the white arrowImage 6-23R5976992 ICON H250/400 13/12/2006 43