7. AdvancedImage 7-34The film mode detection insures that these converted signals are shown without artefacts, especially motion artefacts due to badde-interlacing.This function may cause undesired effects on standard sources, therefore it can be disabled (OFF) at any timeEnabling/disabling the film mode detection1. Press MENU to activate the Tool bar2. Press → to select the Image item3. Press ↓ to Pull down the Image menu4. Use ↑ or ↓ to select Film mode detection5. Press → to pull down the menu6. Use ↓ or ↑ to enable or disable the Film mode detectionImage 7-357. Press ENTERA white bullet shows the active setting7.5.5 Input balanceIntroduction: Unbalanced color signalsWhen transporting signals, there is always a risk of deterioration of the information contained in the signals.The alterations of the three color signals will happen independently i.e. the colors will end to be unbalanced,72 R5976992 ICON H250/400 13/12/2006
