Barnes 4SE-HL Series Installation And Operation Manual

Also see for 4SE-HL Series: Installation and operation manual

Contents

Barnes 4SE-HL Series Installation And Operation Manual Manual pdf 14 page image

14SECTION: G REPLACEMENT PARTSG-1 ORDERING REPLACEMENT PARTS:When ordering replacement parts, ALWAYS furnish the followinginformation:1. Pump serial number and date code. (Paragraph G-4)2. Pump model number. (Paragraph G-3)3. Pump part number. (Paragraph G-2)4. Part description.5. Item part number.6. Quantity required.7. Shipping instructions.8. Billing Instructions.G-2 PART NUMBER:The part number consists of a six (6) digit number, which ap-pears in the catalog. A one or two letter suffix may follow thisnumber to designate the design configuration. This number isused for ordering and obtaining information.G-3 MODEL NUMBER:This designation consists of numbers and letters which repre-sent the discharge size, series, horsepower, motor phase andvoltage, speed and pump design. This number is used for order-ing and obtaining information.G-4 SERIAL NUMBER:The serial number block will consist of a six digit number, whichis specific to each pump and may be preceded by a alpha char-acter, which indicates the plant location. This number will alsobe suffixed with a four digit number, which indicates the date theunit was built (Date Code). EXAMPLE: A012345 0490.Reference the six digit portion (Serial Number) of this numberwhen referring to the product.