Barnett Engineering ProTalk Plus B1290 Operating Manual
                                                                                  | |
Contents
| 
Program Code 1 ÞÞ: VoicesWhen you enter Program Code 1, you will hear the following prompt:B1290: Enter Voice CodeYOU: 1** Record Site ID and alarm messages2** Record relay messages3** Erase all messages** Exit to Enter Program Code prompt1ÞÞ: Record Alarm Voices (includes Site ID)Record the voice messages associated with the unit (site ID) and each indi-vidual alarm point. These are the messages which will be announced overthe radio or telephone whenever the alarm is present.B1290: Site is Ajax Compressor StationYOU: 2** Record#** Quit** Enter/NextDefault: emptyIf the message is OK, continue by hitting Enter. If you would like to record anew message, enter 2ÞÞ to record. As soon as you hit the second asteriskof the Enter code, the B1290 will prompt you to record a voice message.When you stop speaking, the B1290 will immediately play back the mes-sage that you recorded. Pauses between words may cause the recording toterminate. Repeat as many times as you need until the voice messagesounds acceptable. Then hit Enter (ÞÞ) to proceed, or #ÞÞ to exit back tothe Enter Voice Code prompt.Entering Next advances to the alarm message section and the first alarmmessage will be spokenB1290: Alarm One is …YOU: 2** Record#** Quit** Enter/NextIf you enter messages for all eight alarms, the B1290 will automatically exitto the Enter Voice Code prompt.Default: empty29 Program Codes |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine