Baroness LM283 Owner's Operating Manual

Also see for LM283: Owner's operating manual

Contents

Baroness LM283 Owner's Operating Manual Manual pdf 65 page image

If the belt is too slack, loosen bolts A and B(that affix the alternator), then move thealternator to adjust the tension.2534110 mm(0.39 in)sdie3r-002Fan Belt_0011 Fan belt2 Blade3 Alternator4 Bolt A5 Bolt BAdjustment of Parking BrakeDangerDangerIf the brake wire is cut, the machine will beunable to stop. This would be extremelydangerous.If the brake wire is cracked or damaged,replace it with a new one immediately.If the parking brake is not sufficiently effectivewhen you pull the parking brake lever, adjustthe brake wire.Adjust the parking brake by tightening the brakewire adjustment bolt.1243ulabms-003Adjustment of Parking Brake_0011 Parking brake lever2 Lock nut3 Adjustment bolt4 Brake wire2. Adjustment of BrakeDangerDangerIf the brake wire is cut, the machine will beunable to stop. This would be extremelydangerous.If the brake wire is cracked or damaged,replace it with a new one immediately.If the brake is not sufficiently effective, adjustthe brake wire.Adjust the foot brake by tightening the foot brakewire adjustment bolt.3421nfzln9-002Adjustment of Brake_0011 Lock nut2 Adjustment bolt3 Brake wire4 Brake leverAdjusting the Neutral Position of thePiston PumpStop the engine.Place the jacks beneath the jack-up points,then lift the machine off the ground.Use stable jack stands and elevate until thetires lift off the ground.（(See "Jack-upPoints" (Page 9-4) .)Start the engine, and rev it up to themaximum rpm.Adjust the neutral position.If the front tires rotate forward, loosen thelock nuts, then turn the front wheel rod toshorten it.1.2.3.4.[1]MaintenanceLM283MaintenancePage 9-11Maintenance (Main Body)