Baroness LM285 Owner's Operating Manual

Also see for LM285: Owner's operating manual Owner's operating manual

Contents

Baroness LM285 Owner's Operating Manual Manual pdf 32 page image

WireInspection of WireMake sure that the wire is not cracked ordamaged.If the wire is cracked or damaged, replace itwith a new one immediately.Around the EngineInspection of Engine-Associated PartsFor details on handling the engine, pleaserefer to the Engine's Owner's Manual.Check the fuel system parts for loosened orcracked joints and leakage. Replace theparts if necessary.Blow compressed air to clean any grass orflammable materials that may be attachedinside or around the muffler.Engine OilInspection of Engine OilFor details on handling the engine, pleaserefer to the Owner’s Manual for the engine.ImportantSecurely tighten the oil level gauge and oilfiller cap.Stop the engine, wait for 10 to 20 minutesfor the engine to cool down, then check theoil level.Position the machine so that the engine willbe level, then insert the oil gauge all theway to check the oil level.12oowuz-003Inspection of Engine Oil_0011 Oil gauge1.2.1.2.1.2.The appropriate oil level should be betweenthe upper and lower limit lines on thegauge.2 31rnr453-004Inspection of Engine Oil_0021 Oil gauge2 Upper limit3 Lower limitSupply of Engine OilFor details on handling the engine, pleaserefer to the Owner’s Manual for the engine.ImportantDo not supply too much engine oil. Otherwise,the engine may be damaged.ImportantDo not mix different types of engine oil.ImportantBe sure to use engine oil that is classified asAPI Service Grade CF or higher, with an SAEViscosity that is appropriate for the operatingenvironment (ambient temperature).ImportantSecurely tighten the oil level gauge and oilfiller cap.Engine oil is supplied through the oil fillingport.Remove the oil filler cap, and then supplynew engine oil until the oil reaches a levelin between the upper and lower limit lineson the oil level gauge.3.1.LM285Handling InstructionsPage 4-10 Inspection Before Use