If the belt is too slack, loosen bolts A and B(that affix the alternator), then move thealternator to adjust the tension.2534110 mm(0.39 in)sdie3r-002Fan Belt_0011 Fan belt2 Blade3 Alternator4 Bolt A5 Bolt BAdjustment of Parking BrakeDangerDangerIf the brake wire is cut, the machine will beunable to stop. This would be extremelydangerous.If the brake wire is cracked or damaged,replace it with a new one immediately.If the parking brake is not sufficiently effectivewhen it has been applied, adjust the brakewire.Adjust the parking brake by tightening thebrake wire adjustment bolt.1243ulabms-003Adjustment of Parking Brake_0011 Parking brake lever2 Lock nut3 Adjustment bolt4 Brake wire2. Adjustment of BrakeDangerDangerIf the brake wire is cut, the machine will beunable to stop. This would be extremelydangerous.If the brake wire is cracked or damaged,replace it with a new one immediately.If the brake is not sufficiently effective, adjustthe brake wire.ImportantAdjust to reduce the play in the brake lever asmuch as possible so that the brake does notdrag when the lever is released.Adjust the brake by tightening the brake wireadjustment bolt.If there is too much play in the brake lever,the braking power is reduced and thebrake pedal feel is light.If there is too little play in the brake lever,the braking power is increased and thebrake pedal feel is heavy.3421nfzln9-002Adjustment of Brake_0011 Lock nut2 Adjustment bolt3 Brake wire4 Brake leverStart the engine and drive to check thefollowing.Make sure that heat is not generated inthe brake area.Make sure that the left and right brakesare equally effective.1.・・2.・・LM285MaintenancePage 5-14 Maintenance (Main Body)