ImportantDo not use solid objects, such as a spatula orscrewdriver, or high-pressure water to cleanthe radiator or oil cooler.Otherwise, special fins or tubes may bedamaged, possibly resulting in reducedcooling performance or coolant leakage.If the oil cooler has been contaminated withdust, be sure to clean it.After operating the machine in a dustyenvironment, it is important to remove dust assoon as possible.Open the radiator cover.Loosen the knobs on the left and right ofthe oil cooler, and then tilt the oil cooler.2137k9g1-001Cleaning of Oil Cooler_0011 Radiator2 Oil coolerCarefully clean the front and back of the oilcooler with water or compressed air.Hydraulic OilInspection of Hydraulic OilRaise the mower units and maintain thatposition on a level surface.1.2.3.1.Make sure that the oil level is at the middleof the oil gauge.12hmu8nk-003Inspection of Hydraulic Oil_0011 Oil gauge2 Hydraulic tankCheck underneath the machine for oilleakage.Hydraulic Oil SupplyImportantDo not mix different types of oil.ImportantUse Shell Tellus S2M46 (or equivalent) ashydraulic oil.If the oil level is low, open the tank cap andsupply oil.1k9yr5z-005Hydraulic Oil Supply_0011 Tank capStart the engine, raise and lower the mowerunits, and turn the steering wheel left andright.Move forward and reverse repeatedlyseveral times.2.3.1.2.Handling InstructionsLM285Handling InstructionsPage 4-5Inspection Before Use