Specified ValuesFuel tank capacity 38.0 dm 3 (38.0 L)Hydraulic tank capacity 24.0 dm 3 (24.0 L) Shell Tellus S2M46 (or equivalent)Quantity of engine oil 3.1 dm 3 (3.1 L) Summer: SAE30, Winter: SAE20Coolant volume 6.0 dm 3 (6.0 L) Including 1.0 dm 3 (1.0 L) reserve tankType R Front tire 120 kPa (1.2 kgf/㎝ 2) 23 x 10.50 - 12 4PRear tire 150 kPa (1.5 kgf/cm 2) 23 x 8.50 - 12 4PCutter adjustment spring 1 mm Clearance of springMain Consumable PartsPart Name CodeFan belt PF1G345-9701-0Oil element PF16271-3209-2Air cleaner element PFT0270-1632-0Fuel filter element PF15231-4356-0Suction filter element K3413000020Hydraulic cartridge filter K3412000060Hydraulic oil (20 L can) K2913100200Brake wire, left K1120107000Brake wire, right K1120125000Side brake wire K1120141010Throttle wire K1110101000Brake shoe, front right P741-8005-00Brake shoe, rear right P741-8007-00Brake shoe, front left P741-8006-00Brake shoe, rear left P741-8008-00Jacking up the machineAbout the Jacking up the machineWarningWhen replacing a tire or beginning any othermaintenance or repairs, be sure to chock thewheels to prevent the machine from moving.Before jacking up the machine, park it on ahard, flat surface such as a concrete floor andremove any obstacles that could prevent youfrom performing the work safely. Whennecessary, use an appropriate chain block,hoist, or jack. Support the machine securelywith jack stands or appropriate blocks. Failureto do so may cause the machine to move orfall, resulting in injury or death.Use the jack-up points identified in this manualwhen jacking up the machine.Only place a jack under the jack-up pointsspecified. Placing a jack at any other point couldresult in damage to the frame or other parts.LM285MaintenancePage 5-4 Jacking up the machine