11 Faults – causes andremediesHandscannerBCS 3600ex series98 / 106 Subject to technical modificationsRevision A / 04/2019Set Factory Default - Remove Custom Defaults (Reset to Factory Defaults)Set Factory Default - Scan the "Set Factory Default" barcode below to remove all user-defined defaultsand reset the hand-held scanner to the factory defaults.(For Factory Default, see the Zebra "Product Reference Guide" for the DS36X8. "Appendix A, StandardDefault Parameters")Figure 35 Barcode Factory Default Barcode “Set Factory Defaults” scanning.Write to Custom Defaults - Set user-defined default valuesSetting custom default values is described in ZEBRA's Product Reference Guide.- Write custom defaults - Custom defaults can be configured to set unique defaults for all parameters.After changing all parameters to the desired values, scan the following Write to Custom Defaultsbarcode to accept/save the new custom default setting.Figure 36 Barcode Write to Custom Defaults Barcode “Write to Custom Defaults” scanning.
