HandscannerBCS 3600ex series 5 Transport and storageSubject to technical modificationsRevision A / 04/2019 43 / 1065 Transport and storage5.1 Check the contents and condition of delivery1. Unpack the product on delivery.– Repack for transport to the product’s destination.2. Check that the contents are complete (see Chapter 14).3. Check all components for transport damage.4. Report transport damage and missing components to the transport company and your localBARTEC sales office immediately.Keep the transport packaging for any future returns.5.2 StoragePay attention to the ambient conditions when storing the hand-held scanner and battery (seeChapter 14).5.2.1 BatteryHeat, cold, extreme environmental influences and serious damage caused by falls can lead to restrictedcharge capacity, the rusting of metal parts and the escape of electrolyte.There may a permanent reduction in quality if the battery is stored for more than six months.The standard warranty period for batteries from BARTEC is 6 months, irrespective of whether theyare bought separately or together with a hand-held scanner. Always store batteries charged to at least 50 % in a cool and dry place outside the device. When storing for more than one year: check the state of charge at least once a year and chargeto at least 50 % of the charge capacity where necessary. Replace the battery if there is a substantial reduction in the operating time.Battery is UN38.3 conform.Due to the transport guidelines for air freight, all batteries are delivered ex works charged to max.30 %.
