TRANSFERSCHAIR TO BED TRANSFER1. Choose the appropriate sling for your resident and place it under them. (Formore information on using slings please see the Slings section of this manual).2. Adjust the legs of the Ready Care Lift to straddle the chair. Use your left foot topush the left pedal of the leg adjustment to widen the legs to the correct width.The leg assembly has three width positions.3. Lower the lift arm assembly by using the hand control, to enable you to attachthe sling to the hanger.4. Raise the resident by using the hand control.5. Transfer the resident to the bed and raise them high enough to clear the bed.6. Position the resident over the centre of the bed and lower them using the handcontrol.7. Unhook the sling and move the Ready Care Lift away.8. Turn the resident on their side and turn the sling towards their back. Turn theresident onto their other side and remove the sling.15