Bartscher 116050 Original Instruction Manual

Bartscher 116050 Original Instruction Manual Manual pdf 18 page image

- 55 -• The device shall never be placed near heat sources, fryers or other sources of hotliquids; in case it is not possible to meet this requirement, the safe distance is 50 cmfrom the sides and top of the device and 70 cm at its rear.• Never place the device near combustible materials or containers made of flammablematerials (such as walls, furniture, partitions, gas cylinders) since it could lead to afire hazard. In case it is not possible to meet this requirement, cover the flammablecomponents with non-flammable thermo-insulating material, and follow the fireregulations strictly.5.1.4 Preparing to Install• Remove the outer packaging (wooden box and/or cardboard) and dispose of them inaccordance with the regulations in force in the country of installation.Remove the protective film• Remove the protective film completely from theexternal and internal walls.• Remove any accessories, informational materials andplastic bags from the combi steamer.Adjusting the feetCAUTION!Do not use the combi steamer without the feet.• When the combi steamer is used without thefeet, the air flow needed to cool digitalcomponents and external walls is not provided,and this can cause overheating and damage tothe combi steamer.• The adjustable feet are attached with thepacked unit and must be screwed to thecombi steamer.• The correct flat position of the combi steamer ensures its trouble-free operation.Such position is achieved by adjusting the feet and checking it with a spirit level.To adjust the feet, simply tighten or loosen them.