Bartscher 116050 Original Instruction Manual

Bartscher 116050 Original Instruction Manual Manual pdf 19 page image

- 56 -Attaching the drip tray• The drip tray is used to collect liquids whichmay flow out through the front door of thecombi steamer. Place the tray in front of thecombi steamer and fasten it with screws foundin a bag provided in the package. The screwsare screwed into the threaded inserts in thelower front part of the combi steamer (Figureon the right).Attaching the drip tray drain• Fit a plastic closure and a white water drainhose which is found in the package. Makesure that the hose is installed and fixed insuch a way as to allow the water to properlydrain from the drip tray to the sewagenetwork (Figure on the right).5.1.5 Power supply connectionDANGER! Electric shock hazard!In the case of improper installation the device may cause injuries!Before the installation compare the local power grid parameters with theparameters of the combi steamer power supply (see the nameplate). Thedevice can be powered only when these data are consistent!• Before connecting to the power grid, make sure that the voltage and frequencyindicated on the nameplate correspond with those of the local power grid.The allowable deviation in voltage is ± 10%.• When the device does not have wheels to facilitate its movement we recommend toconnect the device to the power supply first, and then position it in its workplace.• Make sure the power cord does not get damaged when moving the combi steamer.This way the combi steamer will be connected to the power supply without difficultyand in a more safety manner. The power cord shall be placed so that it does notreach the ambient temperature higher than 50 °C at no point.