Batco 1565 SA Assembly Manual

Also see for 15100 SA: Operator's manual

Contents

Batco 1565 SA Assembly Manual Manual pdf 24 page image

24 P1512114 R44. AssemblyBefore continuing, ensure you have completely read and understood this manual’sSafety section, in addition to the safety information in the section(s) below.4.1. Assembly Safety• Do not take chances with safety. The components can be large, heavy, and hard to handle.Always use the proper tools, rated lifting equipment, and lifting points for the job.• Carry out assembly in a large open area with a level surface.• Always have two or more people assembling the conveyor.• Make sure you have sufficient lighting for the work area.• Tighten all fasteners according to their specifications. Do not replace or substitute bolts,nuts, or other hardware that is of lesser quality than the hardware supplied by themanufacturer.4.2. Check ShipmentUnload the conveyor parts at the assembly site and compare the packing slip to the shipment. Ensure that allitems have arrived and that none are damaged.Report missing or damaged parts immediately to ensure that proper credit is received from Batco or yourdistributor/dealer, and to ensure that any missing parts can be shipped quickly to avoid holding up the assemblyprocess.ImportantDo not assemble or install damaged components.4.3. Required Tools• 2 sawhorse(s)(1200 lb [544.3 kg])• 1 tape measure(s)(25’ [7.6 m])• 1 jack or forklift or overhead crane • 1 level(2’ [61 cm])• 1 standard socket set(s) • 1 level magnetic(2’ [61 cm])• 1 wrench set(s) • 1 ratchet strap• 1 torque wrench(es) • 2 C-clamp(s) or vise grip(s)• 1 power drill(s) • 1 tire pressure gauge• 1 self-tapping screw bit(3/8”)• 1 fish tape(120’ [36.6 m])• 1 tire chuck4. ASSEMBLY PORTABLE GRAIN BELT CONVEYOR – SWING AWAY