ImVT 120 II Mini VerticusPage 92 1st Edition, Rev. 0 Chg. 107.12 Check Compressor Rotation Direction.Turn the motor one or two revolutions to ensure proper rotation of the compressor. See Figure 7-17.1. Remove the cover from the starter by rotating the cover screw (1) counter-clockwise.2. Remove cover, and manually depress the blue armature of the starter (2) for a second.3. Ensure compressor rotation is in accordance with the directional arrow on the compressor fanshroud. The fan should blow air across the compressor block.4. If rotation is incorrect, switch any two of the three power leads to reverse the rotation of the motor.5. Replace starter cover.Figure 7-17 Checking Compressor Rotation Direction1. Cover Screw 2. Starter Armature12
