Baumer OM70 Operating Instructions Manual
Also see for OM70: Operating instructions
                                                                | |
Contents
| 
en_BA_OM70_point_line.docx 12/64 Baumer Electric AG6/6/2018 8:28 AM/tof V2.0 ANW_81250853 Frauenfeld, Switzerland3.3 MountingThe sensor has four mounting holes for flexible alignment and mounting. The use of 2 M4x35 screws as wellas suitable washers is recommended for mounting. The tightening torque is max. 1.2 Nm.3.3.1 Mounting kit for standard installation Order no. 11120705With the mounting bracket for standard installation, the sensor can be mounted quickly and easily at a 90°angle to the reference surface.Tightening torquemax. = 1.2 NmMounting kit 11120705Contents of this set:- 90° mounting bracket- Threaded plate- 2x spherical head screw M4x35 Torx- 1x Torx tool T2066 mm28.5 mm |
Related manuals for Baumer OM70
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine