Baxall Vivid User Manual
                                                        | |
Contents
| 
Baxall Vivid Digital Video Recorder User Manual30NETWORKINGSelecting Networking from the Hardware setup menu will open a menu similar to one of the following:Ethernet enabled allows you to enable or disable Ethernet connectivity. Options are Yes or No. If the option is set to Yes,additional menu items will be displayed.Use DCHP (only visible if Ethernet enabled is set to Yes) allows dynamic IP addresses to be enabled or disabled. Options areYes or No.If yes is selected IP addresses will be obtained automatically; if no, IP addresses must be entered manually.IP addresses (only visible if Ethernet enabled is set to Yes) allows you to manually set up IP addresses. Selecting this field andpressing the enter key will open the following menu:To edit an address, select the field to be edited using the up/down arrow keys and then press the enter key. The selectedaddress will be opened in a sub menu with the first three numbers selected (IP addresses can only be edited manually if UseDCHP is set to no):Use the up/down arrow keys or camera number keys (1 to 9) to change the selected numbers. When finished, use the rightarrow key to select the next three numbers in the address. Again, use the up/down arrow keys or camera number keys tochange the numbers. Carry on in this manner until the address has been fully entered. Press the enter key to quit editing.Email setup (only visible if Ethernet enabled is set to Yes) allows you to configure the settings required for the Send emailaction. To edit the properties, highlight the field and press the enter key. A sub menu similar to the following will appear:IP address 192.168.000.231Subnet mask 255.255.255.000Default gateway 192.168.000.250DNS server 192.168.000.250NTP servers 130.88.200.98xxx.xxx.co.uk(Not set)(Not set)(Not set)192.168.000.231SMTP server 207.228.254.011SMTP port 25SMTP domain baxall.comFrom address vivid@baxall.comEmail addresses vivid@baxall.com(Not set)(Not set)(Not set)(Not set)Send test mailEthernet enabled YesUse DCHP NoIP addressesEmail setupLocal domain baxall.comBandwidth limit 50%Use proxy server YesProxy server (not set)Proxy port 8080Proxy username (not set)Proxy password (not set)RS485 usage Dome controlDome protocol (RS485) Baxall ProdomeDome protocol (Screw) Baxall ProdomeRS232 setupMAC addressRS485 useage set to External keyboardRS485 useage set to Dome controlEthernet enabled YesUse DCHP NoIP addressesEmail setupLocal domain baxall.comBandwidth limit 50%Use proxy server YesProxy server (not set)Proxy port 8080Proxy username (not set)Proxy password (not set)RS485 usage External keyboardRS485 address 1RS485 baud rate 9600Dome protocol (Screw) Baxall ProdomeRS232 setupMAC address |
Related manuals for Baxall Vivid
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine