Baxall Vivid User Manual
                                                        | |
Contents
| 
Baxall Vivid Digital Video Recorder User Manual32CONFIGURE DISPLAYThis menu item allows configuration of the monitors that are connected to the Vivid DVR. The top level menu is divided intoMain monitor and Spot monitor. Selecting Main monitor will open a menu similar to the following:Main Monitor SettingsFull screen interlace interlaced images are made of two fields. In full screen this will give the impression of a higher resolutionand sharper image. Select either Yes or No.Multiscreen interlace interlaced images are made of two fields. In Multiscreen this will give a sharper image but may appearto shimmer. Select either Yes or No.Monitor Type Select from Overscan or Underscan to suit the type of monitor you are using. The difference between thesetwo options will produce either a stretched or normal size image to suit the type of monitor used.Sequenced activates the display to sequence between all the cameras that have been enabled within the Sequence menu.Select Yes or No.Sequence (only visible if Sequenced is set to Yes) allows you to select which of the cameras connected to the Vivid DVR willbe included in the sequence when the sequence key is pressed on the front panel. Selecting the field and pressing the enterkey will open a menu similar to the following:1. Select a camera using the up/down arrow keys and press enter. Use the up/down arrow keys to select Yes to include theselected camera in the sequence, or No to omit it. Press the enter key when finished.2. Use the up/down arrow keys to select the next camera and follow step 1.3. When all the cameras required in the sequence (or not) have been edited, press the left arrow key to exit the menu.Dwell time (only visible if Sequenced is set to Yes) allows you to select the time period that each camera will be displayed untilthe sequence moves on to the next camera. Select the field and press enter. Use the up/down arrow keys to select from 1 to 60seconds. Press enter to exit.Show on-screen display turns the on-screen display (date, time, camera names, etc.) on or off.On-screen display setup (only visible if Show on-screen display is set to Yes). Selecting the field and pressing the enter keywill open a menu similar to the following:Full screen interlace YesMultiscreen interlace YesMonitor type OverscanSequenced YesSequenceDwell time 4sShow on-screen display YesOn-screen display setupOn-screen display offsetsCamera1 YesCamera2 YesCamera3 YesCamera4 YesCamera5 YesCamera6 YesCamera7 YesCamera8 YesCamera9 YesCamera10 YesCamera11 YesCamera12 YesCamera13 YesCamera14 YesCamera15 YesCamera16 Yes |
Related manuals for Baxall Vivid
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine