Beamz Fuze 610Z WASH User Manual

Contents

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are present, and have beenreceived in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damage from shipping or thepackage itself shows signs of mishandling. Save the package and all packing materials. In the event that the product must be returned to the factory, itis important that the product be returned in the original factory box and packing.If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensationwater might damage your device. Leave the device switched off until it has reached room temperature.On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains voltage corresponds tothis, all other voltages than specified, the light effect can be irreparably damaged. The product must also be directly connected to the mains and maybe used. No dimmer or adjustable power supply.Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate electrica l ground to avoidthe risk of electrocution or fire.The fixture may be set up on a stable and even surface. By means of the fixing facilities of the baseplate, the unit can also be mounted upside down to atruss, see below picture. For fixing, certified clamps with correct save working load are required. According to the figure, the quick lock bolts of theomega brackets are placed into the openings provided in the base plate and turned clockwise until they lock (to the stop). The mounting place must beof sufficient stability and be able to support a weight of 10 times of the unit’s weight. Secure the fixture with a safety cable so that it cannot fall down.When carrying out any installation, always comply European and national guidelines concerning rigging, truss and all other safety issues. Always let theinstallation checked out by an authorized dealer !