83cab Produkttechnik GmbH & Co KG / Tharo Systems, Inc.Safety InstructionsThe printer must be powered OFF before mounting the rewinder.Before connecting the rewinder to the power supply, make sure that thevoltage selected on the power module corresponds with the supplyvoltage !If it differs, alter the setting accordingly.During operation, the rotating axle is openly accessible !Therefore, keep long hair, loose clothes, and jewelry away from themoving parts !The rewinder starts operating as soon as it is switched ON !Risk of injury from moving parts !Set the switch (1) to the required method of rewinding:- Rewind with the labels on the outer side of the silicon liner- Rewind with the labels on the inner side of the silicon linerSelecting the Method of RewindingThe external rewinder allows rewinding of labels in both ways outside andinside winding.1Fig. 13 b Set the method of rewinding
