CAB MAESTRO 2M Operator's Manual

Also see for MAESTRO 2M: Instructions for use and service Instructions for use and service

Contents

5• Always have service work done in a qualified workshop, where the personnel have the technical knowledge andtools required to do the necessary work.• There are various warning stickers on the device. They draw your attention to dangers.Warning stickers must therefore not be removed, as then you and other people cannot be aware of dangers andmay be injured.Danger!Danger to life and limb from power supply. Do not open the device casing.1.4 Safety Marking21Fig. 1 Safety marking1 Risk of hand injury ! Wear protective gloves while PCB separating.2 Hazard by electrical charge ! Provide an earthing connection via press stud.Table 1 Safety marking1.5 Environment Obsolete devices contain valuable recyclable materials that should be sent for recycling. Send to suitable collection points, separately from residual waste.The modular construction of the printer enables it to be easily disassembled into its component parts. Send the parts for recycling.1 Introduction