SS15Page 13 of 38Devices incorporate a FT230X USB to UART converter IC from FTDI International. On Windows 7or later, a driver may automatically be installed (if Windows is configured to download driversfrom the internet automatically). If this is not the case, or if a Mac® or Linux® platform is used,the driver may be downloaded from www.ftdichip.com. The VCP drivers are required. ForLinux® or Mac computers, the default OS drivers should be used.The default communications settings should be set to 115200 baud, 8 data bits, no parity, andone stop bit. This is sometimes referred to as "115200,8,N,1". No flow control is used. ANSIterminal emulation should be selected

CAMBRIONIX SuperSync15 User Manual